You are currently browsing the tag archive for the ‘mold’ tag.
This was a talk given by Michele Brown from Cornell University and sponsored by ASLS.
Her e-mail if you have any questions about mold: Mb72@cornell.edu
Molds are fungi.
Mildew is a smaller form of mold.
For our purposes mold and mildew are the same thing.
Mold needs to absorb carbon from other substances in order to live.
Mold spores are the way that mold reproduces and spreads. This is what we are concerned with stopping. These spores land on something and grow out and forms a colony.
If moisture is taken away at this stage, the vegetative part will die, but the spores will remain. It is difficult to kill spores.
Mold spores are smaller than pollen. Mold spores are between 1 and 20 microns in size.
Good air circulation is important – if the mold spore can not land – it can not germinate.
Mold spores have their own toxins.
For activation it needs to have sufficient moisture and food. There are molds that can extract moisture out of the air. Black mold needs to land on a substrate that is constantly wet.
Mold releases toxins when it germinates. This is when you start to see the staining on the materials that have been attacked by molds. It is also digesting the product at that point.
Molds thrive in damp areas.
Mold can grow behind the walls even if it looks like the building is dry. There is an infared therma graph that can see mold in between the walls.
Mold is a little plant – it sends out little roots into whatever it is growing on.
Mold can grow on the side of houses on Latex paint.
75% of dust is composed of dead or dormant mold spores.
Mold can grow inside of us
Molds like to eat cellulose (paper, cloth).
Contact from adjacent moldy material will make it spread.
Contaminated solutions used for cleaning or mixing. Spores can live in Lysol.
Inside – most common are aspergillus and penicillium. Attracted to cloth, animal fur, and fibers.
Xerophilic can extract moisture from the air. These are the types we find in libraries.
Cloth and paper are permanently weakened and stained.
Active mold is still growing. If you rub it – it will leave a smear. Inactive mold looks like dust. Both will cause an allergic reaction.
Inactive mold – wipe the pages with 70% alcohol – will wipe up the spores. Book still looks the same after it as been cleaned. Once an item has had a mold growth – it is likely to happen again when you have a spike in humidity.
Anything that is going to kill mold spores (chemical wise) is not good for your health.
If you have a reaction to mold – it causes a weakening of your immune system. Flu like symptoms, loss of memory, tremors, hallucinations…
“Poisons of the Past” Mary Kilbourne Matossian
Infection of the rye by the ergot fungus responsible for hallucinations which were the basis of the witchcraft trials…
Keep humidity below 60% to not spread.
Dry – humid – dry – humid cycles are good for mold spores. Important to maintain a constant temperature and humidity level. Dehumidifier.
You can smell mold (mildew smell) – different than an old book smell. You can also see it.
Treat all mold as a health hazard.
Spores will start germinating within 24 hours. Colonies will develop within a few days. If there is a flood put fans and dehumidifiers in the first 24 hours will make it that the spores can not land and will start to dry out the air.
If you can not get the materials dried in 24 to 48 hours – should be frozen. Stops the mold from growing. Freeze dried – would stop mold growth and take out moisture.
68 – 72 degrees F. Keep dust out of collections. Less than 60% humidity. Unpack donated books away from your collection. If you have a box that smells suspect, put in a room with a dehumidifier.
HEPA vacuum and static duster without chemicals in it.
Have to lower the humidity to make active mold become inactive.
If you have an outbreak:
Locate source of moisture
Immediately start drying the room and the books out.
Determine size of the outbreak.
If a book is returned wet – put it on a table with a fan on it.
Use glove (nitrol gloves), masks (N95 or N100 rated), non-vented goggles, Aprons or something that you can throw away immediately after you are done. You don’t want to take the mold spores home with you.
Isolate the moldy materials to another room or drape plastic around the area. Should be a well ventilated area.
Mold must be inactive before you can remove it. Lower the humidity. Dry any wet materials and surfaces are dry (direct fans).
Try to keep a book by wiping the powdery substance off with alcohol and cheese cloth or vacuum it with a HEPA vacuum or disposable static cloth. The over the counter alcohol is better than the industrial grade alcohol.
Clean the area thoroughly. Use cleaning solution with bleach. Dry thoroughly. Make sure any carpet is completely dry before returning the books to the stacks.
Discard all the cleaning cloths and everything you wore and used and throw them away.
Keeping books packed tightly – it prevents the air and space needed for mold to grow.
Foxing – mold circles in the paper – actually molding on the metal that is contained in some paper.
Keep the book out of the collection for at least a week until you put it back in to the stacks after you clean it.
Air conditioner blowing on the books – causes mold. Cold air can hold a lot of moisture if it is humid.
http://palimpset.stanford.edu/bytopic/mold/#general A webpage devoted to resources about mold.
http://www.nedcc.org/resources/leaflets.list.php Emergency Salvage of Moldy Books and Paper. Northeast Document Conservation Center Preservation Leaflets.
http://www.labsafety.com Lab Safety Supply
http://www.gaylord.com General Conservation Supplies
http://www.universityproducts.com General Conservation Supplies
http://www.americanfreezedry.com/ Freeze drying of wet materials
http://www.us.belfor.com/ Freeze drying of wet materials (recently did some work for Lourdes Hospital in Binghamton, NY)
http://www.documentreprocessors.com Freeze drying of wet materials.